===================================================================================
INSTALLATION GUIDE
1. Detach the front brake. 2. Install the mud guard
3. Position front wheel with metal tubes and axel, longer tube on the brake disk side.
4. Shorter tube on the other side, carefully insert the axel as picture shown above.
5. Use rubber hammer to make the axel all the way through, and tighten the screw properly.
6. Pull out the spacer between front brake pads, brake pads should be separated front brake disk.
7. Screw the front brake system back firmly. 8. Mount the handle bar.
9. Inspect all parts of the motorcycle, make sure this motorcycle is in safety condition before riding.
===================================================================================